dswd
/
vpncloud
mirror of https://github.com/dswd/vpncloud.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Change example config file

This commit is contained in:
Dennis Schwerdel 2021-02-08 10:11:35 +01:00
parent 7abeea1f95
commit 0cffea7017
2 changed files with 69 additions and 162 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

188
assets/example.net.disabled
View File

@ -1,140 +1,82 @@
# This configuration file uses the YAML format. # This configuration file uses the YAML format.
# ~ means "no value" (i.e. "default value")
# This configuration can be enabled/disabled and controlled by adding the # Replace it by a value and put quotes (") around values with special characters
# network to `/etc/default/vpncloud` and starting/stopping it via # List items start with a dash and a space (- )
# `/etc/init.d/vpncloud start/stop` on non-systemd systems and via # Note that the whitespace before the settings names is important for the file structure
# `systemctl enable/disable vpncloud@NAME` and
# `service vpncloud@NAME start/stop` on systemd systems.
# The port number or ip:port on which to listen for data. listen: 3210 # The port number or ip:port on which to listen for data.
# Note: Every VPN needs a different port number.
listen: 3210
# Address of a peer to connect to. The address should be in the form peers: # Address of a peer to connect to.
# `addr:port`. If the node is not started, the connection will be retried # The address should be in the form `addr:port`.
# periodically. This parameter can be repeated to connect to multiple peers. # Put [] for an empty list
# Note: Several entries can be separated by spaces. - node2.example.com:3210
peers: - node3.example.com:3210
# - node2.example.com:3210
# - node3.example.com:3210
# Peer timeout in seconds. The peers will exchange information periodically crypto: # Crypto settings
# and drop peers that are silent for this period of time. password: ~ # <-- CHANGE # A password to encrypt the VPN data.
peer-timeout: 300 private-key: ~ # Private key (alternative to password)
public-key: ~ # Public key (alternative to password)
trusted-keys: [] # Trusted keys (alternative to password)
# Replace [] with list of keys
# Switch table entry timeout in seconds. This parameter is only used in switch ip: ~ # <-- CHANGE # An IP address to set on the device, e.g. 10.0.0.1
# mode. Addresses that have not been seen for the given period of time will # Must be different for every node on the VPN
# be forgot.
switch-timeout: 300
# Crypto settings # ------------------ Advanced features ahead --------------------
#crypto:
# An optional password to encrypt the VPN data. auto-claim: true # Whether to automatically claim the configured IP on tun devices
#password: ""
# Private key claims: # The local subnets to use. This parameter should be in the form
#private-key: ""
# Public key
#public-key: ""
# Trusted keys
#trusted-keys:
# Supported algorithms. Subset of "aes128", "aes256", "chacha20", and
# "plain" where "plain" means unencrypted.
#algorithms:
# Device settings
device:
# Name of the virtual device. Any `%d` will be filled with a free number.
name: "vpncloud%d"
# Set the type of network. There are two options: **tap** devices process
# Ethernet frames **tun** devices process IP packets. [default: `tun`]
type: tun
# The path of the /dev/net/tun device. Only change if you need to.
#path: /dev/net/tun
# Whether to fix detected rp-filter problems
fix-rp-filter: false
# The mode of the VPN. The VPN can like a router, a switch or a hub. A **hub**
# will send all data always to all peers. A **switch** will learn addresses
# from incoming data and only send data to all peers when the address is
# unknown. A **router** will send data according to known subnets of the
# peers and ignore them otherwise. The **normal** mode is switch for tap
# devices and router for tun devices. [default: `normal`]
mode: normal
# The local subnets to use. This parameter should be in the form
# `address/prefixlen` where address is an IPv4 address, an IPv6 address, or a # `address/prefixlen` where address is an IPv4 address, an IPv6 address, or a
# MAC address. The prefix length is the number of significant front bits that # MAC address. The prefix length is the number of significant front bits that
# distinguish the subnet from other subnets. Example: `10.1.1.0/24`. # distinguish the subnet from other subnets.
# Note: Several entries can be separated by spaces.
#claims:
# - 10.1.1.0/24 # - 10.1.1.0/24
# Whether to automatically claim the configured IP on tun devices ifup: ~ # Command to setup the interface. Use $IFNAME for interface name.
auto-claim: true ifdown: ~ # Command to tear down the interface. Use $IFNAME for interface name.
device: # Device settings
name: "vpncloud%d" # Name of the virtual device. Any `%d` will be filled with a free number.
type: tun # Set the type of network. There are two options: **tap** devices process
# Ethernet frames **tun** devices process IP packets. [default: `tun`]
path: "/dev/net/tun" # Path of the tun device
fix-rp-filter: false # Whether to fix detected rp-filter problems
mode: normal # Mode to run in, "normal", "hub", "switch", or "router" (see manpage)
port-forwarding: true # Try to map a port on the router
switch-timeout: 300 # Switch timeout in seconds (switch mode only)
peer-timeout: 300 # Peer timeout in seconds
keepalive: ~ # Keepalive interval in seconds
beacon: # Beacon settings
store: ~ # File or command (prefix: "|") to use for storing beacons
load: ~ # File or command (prefix: "|") to use for loading beacons
interval: 3600 # How often to load and store beacons (in seconds)
password: ~ # Password to encrypt beacon data with
statsd: # Statsd settings
server: ~ # Statsd server name:port
prefix: ~ # Prefix to use for stats keys
pid-file: ~ # Store the process id in this file when running in the background
stats-file: ~ # Periodically write statistics on peers and current traffic to the given file
hook: ~ # Hook script to run for every event
hooks: {} # Multiple hook scripts to run for specific events
# An IP address to set on the device
#ip: ""
# A command to setup the network interface. The command will be run (as # Copy this template and save it to a file named /etc/vpncloud/MYNET.net (replace MYNET with your network name)
# parameter to `sh -c`) when the device has been created to configure it. #
# The name of the allocated device will be available via the environment # On systems using systemd (most common):
# variable `IFNAME`. # start/stop the network: service vpncloud@MYNET start/stop
#ifup: "" # enable/disable automatic startup: systemctl enable/disable vpncloud@MYNET
#
# A command to bring down the network interface. The command will be run (as # On older systems (using sysv init):
# parameter to `sh -c`) to remove any configuration from the device. # Add the network name to /etc/default/vpncloud
# The name of the allocated device will be available via the environment # start/stop all VpnCloud networks: /etc/init.d/vpncloud start/stop
# variable `IFNAME`.
#ifdown: ""
# Store the process id in this file when running in the background. If set,
# the given file will be created containing the process id of the new
# background process. This option is only used when running in background.
#pid_file: ""
# Change the user and/or group of the process once all the setup has been
# done and before spawning the background process. This option is only used
# when running in background.
#user: ""
#group: ""
# Beacon settings
beacon:
# File or command (prefix: "|") to use for storing beacons
#store: ""
# File or command (prefix: "|") to use for loading beacons
#load: ""
# How often to load and store beacons (in seconds)
interval: 3600
# Password to encrypt beacon data with
#password: ""
# Statsd settings
#statsd:
# Statsd server name:port
#server: ""
# Prefix to use for stats keys
#prefix: ""

37
src/config.rs
View File

@ -660,43 +660,8 @@ statsd:
} }
#[test] #[test]
fn default_config_as_default() { fn parse_example_config() {
let mut default_config = Config {
device_type: Type::Tun,
device_name: "".to_string(),
device_path: None,
fix_rp_filter: false,
ip: None,
ifup: None,
ifdown: None,
crypto: CryptoConfig::default(),
listen: "[::]:3210".to_string(),
peers: vec![],
peer_timeout: 0,
keepalive: None,
beacon_store: None,
beacon_load: None,
beacon_interval: 0,
beacon_password: None,
mode: Mode::Hub,
switch_timeout: 0,
claims: vec![],
auto_claim: true,
port_forwarding: true,
daemonize: false,
pid_file: None,
stats_file: None,
statsd_server: None,
statsd_prefix: None,
user: None,
group: None,
hook: None,
hooks: HashMap::new()
};
let default_config_file =
serde_yaml::from_str::<ConfigFile>(include_str!("../assets/example.net.disabled")).unwrap(); serde_yaml::from_str::<ConfigFile>(include_str!("../assets/example.net.disabled")).unwrap();
default_config.merge_file(default_config_file);
assert_eq!(default_config, Config::default());
} }
#[test] #[test]